The newly redesigned JM-3055 Jet-Set™ water jet drain cleaning machine from General Pipe Cleaners has the power to clear your most stubborn stoppages, including grease, sand and ice. Its 3000 psi, 5.5 gpm pump has the thrust to pull the hose down long runs, the pressure to cut through the stoppage, and the flow to flush it away.

The JM-3055 is well balanced so that with little effort the machine can be tipped back on its rear wheels to more easily maneuver it into position. A removable 300 ft. capacity hose reel is mounted on the heavy duty tubular frame with four pneumatic tires and a wheel brake.

A tough 16 hp (480 cc) Briggs and Stratton Vanguard engine with electric start and 2 to 1 gear reducer drives the triplex pump. Vibra-pulse® on demand helps the hose slide easily down long runs and around tight bends.

Standard safety features include a thermal relief valve to protect the pump from heat damage, along with a backflow check valve and inlet filter. Complete with a tool box, spray wand and chemical injector.

For more information, contact the Drain Brains® at General at 800-245-6200 or 412-771-6300, or visit www.drainbrain.com/jets.

General Pipe Cleaners is a leading manufacturer of high quality drain cleaning equipment since 1930. General serves drain cleaning professionals and plumbing contractors, as well as facilities managers, the rental industry and the hardware/home center market. The toughest tools down the line.

The new 290-Series effluent pumps from Liberty Pumps feature a one-piece cast iron motor housing and base, stainless steel rotor shaft and permanently lubricated upper and lower ball bearings. The 290-Series boasts pumping heads to 48 feet and maximum flows to 83 gallons per minute. With a 1-1/2″ discharge and ¾” solids-handling capability, the new series is available with power cord lengths of 10′, 25′, 35′ and 50′ (depending on model). Now backed by Liberty’s three year limited warranty.

Liberty Pumps, located in Bergen, New York was founded in 1965 as a privately held, family owned company. Liberty has grown to become a Rochester Top 100 Company and leading domestic manufacturer of sump, sewage and effluent pumps for the professional trade in North America. With a strong team of dedicated members backing each area of the company, you can count on Liberty to bring you the best in pumping products.

For more information, visit the website at www.libertypumps.com or call 800.543.2550.

Introducing the new MC Advanced Series from GapVax
New to our product line, the MC Advanced Series, was designed around the operator giving control over all aspects of your GapVax with less effort and more functionality. GapVax’s MC Advanced Series is an innovative system control that includes a superior monitoring system allowing the operator to observe and troubleshoot the entire system. The display screen (one inside cab/one outside) will control hydraulics, blower, and water pump operations with a complete compliment of gauges. All body functions, boom and hose reel functions, vacuum break, throttle, area and safety lighting are wireless controlled. GapVax will have the most wireless functions available while still maintaining proportional boom and hose reel control. You will still get the same great quality you demand: 3/16″ ASTM A572 Grade 50 Exten steel, five to twelve cubic yard (stainless steel also available) debris body, and stainless steel water tank with the capacity of up to 2,000 gallons. Vacuum pump options range from 3,500 to 5,000 CFM with up to 27″ Hg. The heavy-duty double acting single-lift cylinder provides a stable 50 degree dump angle. The MC series boom is an 8’ front-mounted, telescopic design with dual lift cylinders, reaching 26′ with a 270 degree rotation.

For more information visit www.gapvax.com or call 888.442.7829.

Aquatech B-10 Combination Jet/Vac Truck Mounted Systems
The B10 Combination Cleaner is designed to give unsurpassed performance in catch basins, storm and sanitary sewers, lift stations and treatment plants in municipal and industrial applications. High performance, state-of-the-art features are designed to increase productivity. The 360º rotating boom allows faster positioning of the vehicle at work locations. A top loading boom provides even load distribution, combined with a tandem axle chassis for maximum payload capacity. Single engine operation for all systems eliminates the need for two engines, reducing operating and maintenance costs.
Other benefits associated with the B-10 include:
• Large debris body capacity (10 cubic yards)
• Water tanks manufactured with high molecular density polyethylene that is guaranteed against corrosion, splitting, or cracking.
• Short wheelbase for excellent maneuverability
• Cylindrical debris tank without internal obstructions
• High pressure, continuous flow water pump

For more information visit www.aquatechinc.com or call 800.752.2400.

Vactor 2100 Plus Sewer Cleaner
Designed for public utilities and professional contractors cleaning storm lines, the Vactor 2100 Plus from Vactor Manufacturing features increased vacuum performance and improvements to operator comfort and control, air routing and filtration efficiency and fuel efficiency. This machine delivers plenty of power to clean larger storm lines and keep debris out of the ecosystem and fresh water supplies.

Smart Truck concept features integrated on the sewer cleaner include internal monitoring systems that enable the operator to monitor and troubleshoot flow and pressure, blower temperature and oil level, drive system idle and open vacuum relief. The exclusive Jet Rodder® water pump delivers maximum, continuous flow and pressure with minimal wear. The standard multi-flow system allows the operator to dial in the most effective pressure needed for the application at hand, while using less fuel.

Additional features of the Vactor 2100 Plus include an easy-load, fast-dump debris body, Modul-Flex design system, and positive displacement vacuum and fan platforms.

For more information on the Vactor 2100 Plus, please visit www.vactor.com or contact your local Vactor dealer.

Super Products’ New Mud Dog® 1600 Hydro Excavator Built for Harsh Environments
Super Products LLC designed and built its new Mud Dog 1600 to meet the demanding hydro excavation challenges inherent in oil field, mining and cold weather applications. The unit features a 16 cubic yard debris body, standard 1500 gallon water capacity and rear-mounted boom that in addition to offering 335 degree rotation can pivot down 25 degrees for eight feet of extra digging and access to hard-to-reach areas.

For outstanding digging performance, the Mud Dog 1600 offers water pressures up to 18GPM @ 3000 PSI in combination with its eight-inch positive displacement vacuum system that provides air flow of 5800 cfm/28 Hg to ensure thorough cleanup of debris. An onboard boiler with 714000 Btu/Hr capacity heats up the high-pressure water to break up frozen, stubborn material and flush out tight spaces efficiently. Winter recirculation, anti-freeze and air purge systems ensure the unit performs optimally in even the harshest of climates. Its heated aluminum cabinet offers easy access and increased storage capacity.

The Mud Dog 1600 hydro excavator also has several unique features that result in time and cost savings as well as increase operator convenience. Coupled with Super Products’ industry-unique ejector plate technology, the unit’s ability to tilt its debris body two feet enables fast, thorough unloading and washdowns. Additionally, the truck-mounted hydro vac relies on a single engine design that can result in lower fuel costs and maintenance requirements, and a simple, easy-to-learn control panel setup.

For more information visit www.superproductsllc.com or call 800.837.9711.

Guzzler NX Industrial Vacuum Loader
Built for clean-up and recovery of a wide range of materials, including solids, dry bulk powders, liquids, slurries, and thick, heavy sludge, the redesigned Guzzler NX industrial vacuum loader from Guzzler Manufacturing provides total operator control over working speed, making it the most versatile loader on the market.

At the heart of the Guzzler NX is the powerful Robuschi blower, which delivers 5,435 (free air) CFM, with vacuum capabilities up to 28 inches of mercury. The larger, injection-cooled blower allows the operator to load more material at a lower engine RPM, conserving fuel and significantly reducing noise levels. These advancements in blower and silencer technology eliminate the need for a sound shroud.
The machine delivers ultra quiet operation without the expense or weight of a sound shroud. Rated at 88.9 dB per SAE Test J1372, the redesigned Guzzler NX is the quietest vacuum loader in its class.

The cyclone and bag houses on the redesigned Guzzler NX are configured together to maximize efficiency and reduce overall truck weight—without sacrificing loading capacity. An increased filter area, combined with offline cleaning, extends bag life while forcing carry-over back to the debris tank.

For more information visit www.guzzler.com or contact Annette Adams, Federal Signal Corporation at 847.741.5370 or aadams@fsepg.com.

Cusco Redesigns Hydro Trencher Series
Cusco’s redesigned Hydro Trencher series provides separate water storage containment in dual
500 USG stainless steel vertical water tanks. This new design improves weight distribution, enhances corrosion resistance and improves safety when dumping.

This premier line of hydro excavators is designed for directional boring and removal of waste material when excavating around fragile oil and gas pipelines, installing fiber optic cables, repairing utility lines, or excavating in remote areas with limited access. Applications include liquids, sludge, slurries, mud, gravel and other solid waste. The Hydro Trencher series is available in a wide range of configurations to meet customer needs. It comes standard with cyclonic filtration technology, vacuum system with airflow ratings of 3,500 CFM to 5,500 CFM and generates 28″ Hg of vacuum. Additional features include a wash pump capable of 18 GPM at 3,000 PSI, enclosed hot water burner system and high pressure water jetting, storage cabinets/stand-up lockers, 8″ hydraulic operated boom with 22 foot reach. Available options include stainless steel waste tank construction, heated valves and more.

For more information, visit www.wastequip-cusco.com or call 800.490.3541.

NUHN Magnum 600: The work horse of the industry!

The Magnum 600 is the latest, revolutionary rotary vane vacuum pump from Nuhn Industries Ltd. The Magnum Series is a line of pumps that incorporates incredible performance with dependability, to produce unprecedented air evacuation. The Magnum Series allows for maximum air displacement with minimal restriction, which results in cooler operating temperatures in the harshest conditions.
The uncomplicated design focuses on performance and strength, with no extra moving parts. The Magnum series of pumps are strong and durable enough to be used in the most demanding applications.

For more information visit http://www.nuhn.ca/prod_vacpump_600.html or call 877.837.7323.

Grey Iron Electric Submersible Pumps from American Machine and Tool, Co.

• Grey Iron Construction
• 1-1/2″ and 2″ NPT discharge port sizes
• Motors: 115vac, single phase with 50 ft. power cord included
• Double mechanical and oil lubricated seals with Viton® elastomers or Buna Seal
• Thermal overload protected
• Delivers up to 85 GPM and 25 PSI

The Gorman-Rupp Submersible pumps are well suited for pumping out flooded basements, pools, spas, ponds, pits, or anywhere else where the pump can be lowered into the water. The 50 foot long power cord allows the pump to be lowered into area where a self-priming pump with a suction hose could not readily access.

For more information visit http://www.amtpump.com/products/105-106.shtml or call 888.AMT.PUMP.

Change Everything, Lose Nothing with Westmoor’s Condé ProVac Portable Industrial Pump Out Station

Westmoor Ltd. Manufactures the Conde ProVac Portable Industrial Pump Out Station. The Conde ProVac system is a portable vacuum pumping service unit designed for the most demanding liquid pumping applications. The ProVac unit with integral pressure off-loading is ideal for: grease trap service pumping, machine coolant pumping-cleaning, remote portable toilet pumping, marina vacuum pump out service, or any pumping and transfer of liquid waste. The heavy duty industrial quality ProVac is the intelligent alterative to throw away shop vacs.

For more information visit http://www.westmoorltd.com/Conde-compact.asp or call 800.367.0972.

Cast Iron Pedestal Sump Pump from Liberty Pumps

The Model 101 Cast Iron Pedestal Sump Pump with 1 1/4″ discharge is Liberty’s most popular pedestal pump and features a 1/3 hp motor, heavy-duty dual-contact switch, high-strength cast iron impeller, cast iron base and corrosion-resistant stainless steel shaft. All cast iron parts are epoxy powder coated for a long lasting, durable finish. Zinc coated steel column.

For more information visit http://www.libertypumps.com/ or call 800.543.2550.

Masport’s VK650 fan-cooled vacuum/pressure pump

The VK650 fan-cooled vacuum/pressure pump from Masport Inc. delivers the right amount of oil at all working levels with its automatic oil pump and performs at 23 inches continuous Hg and up to 27 inches Hg intermittent. Fan-cooled for higher continuous vacuum operations, other features of the VK650 include an integrated oil tank, flushing port, and a cushioned spring washer design. The pump accommodates clockwise or counterclockwise drive systems. The integral valve enables the unit to operate in vacuum and pressure modes. Other features include heavy-duty bearings, Viton oil seals and a one year warranty.

For more information call 800.228.4510 or visit www.masportpump.com.

Fruitland’s RCF500 vacuum pump

The Fruitland RCF500 vacuum pump is a commercial and continuous duty vacuum pump designed to reduce costs and downtime. The Fruitland RCF 500 series offers efficient performance in a small package. The Fruitland RCF 500 pump offers “low” oil consumption including an automated oiling system with all steel lines, pump oil level sight gauge, vane gauging ports, anti-shock design, three primary cooling phases, integral air-intake filter, designed to work on both vacuum and pressure.

For more information call 800.663.9003 or visit www.fruitland-mfg.com.

Portable, diesel fueled and designed to destroy dirt and surface contaminants under even the toughest conditions, Water Cannon’s hot water Kohler engine powered pressure washer is one solid piece of machinery. With 4.0 GPM at 3200 PSI, this powerful diesel washer can be customized with a General Pump brand pump or upgraded to a Cat Pumps driven model. No matter which model is selected, the possessor of this power washer will enjoy extensive warranty coverage, including a five-year engine warranty, five-year pump warranty and five-year prorated coil warranty.

A 12 VDC diesel fired burner and battery box make this pressure washer self-contained, so no external power source is needed. Likewise, an eight-gallon poly diesel fuel tank complete with a fuel filter certifies that fueling up is a less frequent occurrence. For further convenience, a durable four-wheel push bar frame and lifting hook mean moving this washer is struggle-free. A 118-degree Fahrenheit temperature rise compliments of reliable Beckett burners and a highly efficient schedule 80 coil with a one-piece molded insulation combustion chamber ensures the operator of this machine will have access to hot water within seconds. And with all of the necessary accessories—including a 50-foot hose, trigger gun, wand, downstream chemical injector and quick connect nozzles—this bad boy is basically ready to roll as soon as it arrives.

Like all of Water Cannon’s gas and diesel powered pressure washers, this hot water pressure washer is assembled in the United States and passes a 15-point factory inspection. Built-in features such as a high temperature protection component, a safety pressure relief valve and a thermo-sensor that prevents overheating in bypass mode protect the pressure washer and its operator from potential damage or harm. The options to purchase this pressure washer via Water Cannon’s leasing program or Net 30 account opportunities make payment more manageable.

Water Cannon has been selling pressure washers, small engines, pumps, replacement parts and accessories since 1981. With its headquarters in Lake Mary, Florida, it is has remained an American, family-owned company since its inception; and with five sales offices nationwide, Water Cannon serves customers across the country as well as abroad via its recently updated website, www.watercannon.com, as well as its toll-free number, 1-800-333-WASH (9274). Live Water Cannon representatives are now available by phone Monday through Friday from 8:00 AM to 7:00 PM Eastern Standard Time. In addition to leasing and Net 30 account payment plans, Water Cannon offers free technical support on all of the equipment it sells.

Super Products LLC has expanded its product line offering with the addition of its new Durasucker®, a DOT/ASME approved vehicle for use in industrial and environmental cleanups.

The Durasucker is a robust liquid vacuum truck with a 3,200-gallon payload capacity designed for removing and transporting liquids, sludge and semi-solid waste. Its high vacuum and pressure offloading provide dependable performance even in the most challenging applications.

The unit’s 72-inch carbon steel cargo tank has a maximum allowable working pressure of 35 PSIG internal and 15 PSIG external (full vacuum). The cargo tank is constructed and certified in conformance with Section VIII of the American Society of Mechanical Engineers pressure vessel code and the Durasucker is certified to meet the U.S. Department of Transportation’s specification DOT412 for hauling hazardous materials on the highway.

As with all Super Products’ equipment, the Durasucker is designed and built for high performance and long life. This new industrial and environmental liquid vacuuming solution includes a wide range of features that ensure ease of use and optimize safety.

Headquartered near Milwaukee, Wisconsin, Super Products LLC has been a leading manufacturer of innovative truck-mounted vacuum equipment since 1972. The company’s line of Supersucker® industrial vacuum loaders, Camel® sewer and catch basic cleaners, and Mud Dog® hydro excavators are recognized for their high quality, durability and ease of operation.

For more information call 800.837.9711 or visit www.superproductsllc.com.

Sim/Tech Filter has developed the TruCore sludge sampler, a large diameter, very accurate, user friendly sludge sampler designed especially for use in the thicker sludge common to septic tanks. It allows samples to be taken quickly without creating excessive turbulence because there are no restrictions caused by valves, stoppers, flaps, etc. With an inside diameter of 1-3/8″ the capacity per foot is almost 10 ounces.

The straight-through design also allows the sample to be quickly and effortlessly returned to the tank. The unit is made of a polycarbonate sampling tube (clearly marked every foot) and PVC fittings. The TruCore comes as a single piece 8 foot unit or as two 4 foot units that slip together to form an 8 foot unit. Custom sizes and configurations are available as well. Another helpful option is a simple and customizable extension kit for deeply buried tanks. Visit our website to see a demonstration.

For more information call toll free 888-999-3290 or www.simtechfilter.com.

In a properly functioning septic tank, the Polylok STEP System (Septic Tank Effluent Pump) will draw effluent from the middle layer (aka “the clear zone”) of your septic tank, filter the remaining unwanted solids then pump the effluent to either a dispersal or wastewater treatment system.

The system installs quickly in a 24” diameter opening in a new or existing concrete or fiberglass tanks. The easy access dual compartment design allows the filter cartridge to be removed without pulling the pump or the entire vault thus saving time and money.

Our complete engineered system includes the polyethylene basin, effluent filter, .5hp High-Head turbine effluent pump 10, 20 (standard) and 30 gpm versions available, internal piping, float switches and a control panel. (Many control configurations and options are available).

For more information call Polylok Inc. at 877-765-9565 or visit http://www.polylok.com/products_details.asp?Product_ID=150

This biological enhanced kit re-establishes percolation in slow and sluggish drainfields, mound systems, cesspools and seepage pits. The kit includes 2 – annual supplies of Lenzyme, 1- concentrated bacteria blend, 2 – Slow Release Oxidizers, 1 instructions sheet and 1 septic educational brochure. Lenzyme ONE SHOT Plus is designed to solve a problem field with one easy application applied at the time of service. Major benefits of One Shot Plus are:

• Low Cost Solution
• Ease of Application
• Customer Retention
• Same Day Repair
• No Special Equipment needed

The Lenzyme annual supplies can be custom private label, Free of charge. Information for ONE SHOT Plus is available in English and Spanish. To learn more about septic and drain solutions please visit our web site at: www.lenzyme.com. You may also visit us at the The Pumper & Cleaner Expo in Indianapolis at booth number; 5026.

The newly redesigned JM-3055 Jet-Set™ water jet drain cleaning machine from General Pipe Cleaners has the power to clear your most stubborn stoppages, including grease, sand and ice. Its 3000 psi, 5.5 gpm pump has the thrust to pull the hose down long runs, the pressure to cut through the stoppage, and the flow to flush it away.

The JM-3055 is well balanced so that with little effort the machine can be tipped back on its rear wheels to more easily maneuver it into position. A removable 300 ft. capacity hose reel is mounted on the heavy duty tubular frame with four pneumatic tires and a wheel brake.

A tough 16 hp (480 cc) Briggs and Stratton Vanguard engine with electric start and 2 to 1 gear reducer drives the triplex pump. Vibra-pulse® on demand helps the hose slide easily down long runs and around tight bends.

Standard safety features include a thermal relief valve to protect the pump from heat damage, along with a backflow check valve and inlet filter. Complete with a tool box, spray wand and chemical injector.

For more information, contact the Drain Brains® at General at 800-245-6200 or 412-771-6300, or visit www.drainbrain.com/jets.

General Pipe Cleaners is a leading manufacturer of high quality drain cleaning equipment since 1930. General serves drain cleaning professionals and plumbing contractors, as well as facilities managers, the rental industry and the hardware/home center market. The toughest tools down the line.