Water Treatment Static Injection Mixer Smaller, Less Expensive Than Traditional Mixers

A fixed plate static injection mixer for water treatment, desalination, and water purification systems that is considerably smaller, lighter, and less expensive to purchase and install than a traditional mixer is available from Westfall Manufacturing Company of Bristol, Rhode Island.

The Westfall Model 2800 Static Mixer is a 316SS wafer-style fixed plate with integral gaskets and a pre-drilled flange that is designed to fit into the mating flange bolt circle of any piping system to provide rapid mixing.

Achieving better than 98% injected fluid dispersion only 10 diameters down-stream, the short laying length is a fraction of traditional mixers, which makes it considerably less costly to produce, ship, install, and maintain.

Available up to 10 ft. dia., the 2″ wide Westfall Model 2800 Static Mixer can replace a traditional mixer which is typically 25 ft. long and very expensive to transport. Featuring beta ratios from 0.7 to 0.9, these feed line mixers can accommodate one or more fluids which are rapidly mixed by a combination of alternated vortex shedding and intense shear zone turbulence.

Westfall’s Model 2800 Static Mixer is priced from $30,000.00 up, depending upon the size and mixing requirements.

For more information contact: Westfall Manufacturing Company
Robert Glanville, Marketing Director
15 Broad Common Rd., Bristol, RI 02809-0007
(888) 928-3747 fax: (401) 253-6530
e-mail: rglanville@westfallmfg.net website: www.westfallmfg.com

No comments yet... Be the first to leave a reply!